Molykote® M-77 Part Assembly Paste
$ $232.01
(2 pt.)

L77PT

$232.01
OR

Quick Overview

Two week lead time

Details

Part assembly; running in; as a press-fitting lubricant where high temperature is a factor.

Specification

  • Primary Use – Part assembly; running in; as a press-fitting lubricant where high temperature is a factor.
  • Special Characteristics – Wider and higher operating temperature range than organic oil based pastes; extreme loads; low speeds.
  • Physical Form – Black, soap thickened, silicone fluid based paste containing more than 60% MoS2.
  • Applications – Lubricating during running-in of gears, splines, journal bearings, cams; reducing torque in tightening threads and bolts; lubricating bearing shafts, O-rings, packings and seals, brake assemblies; press-fitting.
  • Temperature Range – Solids from –50 to 750 degrees Fahrenheit (-45 to 399 degrees Celsius); base oil from –40 to 450 degrees Fahrenheit (-40 to 232 degrees Celsius).
  • Limitations – Not recommended for use in pressure lines.
  • Container Sizes – Cans, pails and drums.