Down Hole Silicone Fluids

Esco Products, Inc. offers high quality E200 Silicone Fluids for use in down hole tooling and subsea applications. With close to 50 years of experience serving the oil & gas and petrochemical industries, we are uniquely qualified to recommend the best E200 Silicone Fluid compound for your application, ensuring reliable, efficient performance from your drilling equipment, even in the harshest environments.

Polydimethylsiloxane (PDMS) silicone compounds, also known as E200 Silicone Fluids or Down-Hole Silicone Fluids, perform well in high pressure, high temperature, high volume oil & gas drilling and extraction applications. They exhibit extremely high compressibility with low coagulation to pressures up to 4,000 MPa and maintain low viscosity in extreme temperatures ranging from -80°C to 230°C. In addition, these compounds are non-flammable, inert, and hydrophobic, minimizing water absorption. Also known as dimethicone, PDMS exhibits high dielectric strength over a wide range of temperatures, low surface tension, corrosion resistance, and heat stability. PDMS is used as a foaming agent, insulator, and lubricant.

Some of the down hole tooling applications that Esco Products’ E200 Silicone Fluids are used for are:

  • Vibration dampener and heat transfer/stabilization for cables, control valves, calibration equipment, flow meters, pressure gauges, and thermostats.  Silicone fluids, with their low viscosity throughout a wide temperature range, high compressibility under high pressure, low surface tension, and heat stability are an ideal material to provide lubrication, vibration dampening, and heat transfer in harsh drilling environments.
  • Liquid-filled instruments, gauges, meters, and controls. Liquid-filled instruments perform well in applications in high vibration, high pressure, high temperature, and corrosive environments. The liquid provides lubrication, reducing wear on moving parts in the instrument. These instruments are hermetically sealed, providing protection in corrosive, high moisture, and freezing environments.
  • Protection for plastic, metal, and rubber components against corrosion, freezing, and vibration. Silicone Fluids are inert to most plastics, metal, and rubber materials and provide protection for gaskets, seals, o-rings, and valves against wear, corrosion and freezing without damaging the part.
  • Subsea applications. PDMS maintains its properties in subsea environments, with low coagulation to pressures up to 4000 MPa and temperatures to -80°C, with minimal water absorption. They provide reliable, long-lasting performance when used in the high volume drilling equipment, hydraulics, and critical instrumentation for subsea applications.

Esco maintains a stock of E200 Silicone Fluids, and offer same-day shipping for most orders. Documentation and lot traceability are available if needed for your application. In addition, we offer gallon and quart packages for applications that do not require large quantities – you can purchase what you need, minimizing cost and waste.

Esco has the experience and expertise to provide you with the E200 Silicone Fluid you need for your application. Whether you need lubrication for a sensor a deep sea drilling rig or lubrication for a high wear turbine component, we can provide you with an E200 Silicone Fluid designed for your application. Call today to see how we can help you.

  1. 1 Pint
  2. 1 Pint
  3. 1 Pint
  4. 1 Pint
  5. 1 Pint
  6. 1 Pint
  7. 1 Pint
  8. 1 Pint
  9. 1 Pint
  10. 1 Pint
  11. 1 Pint
  12. 1 Pint
  13. 1 Pint

per page
Set Descending Direction

13 Item(s)